Solution to repairing carbide die parts.
* Solution to physical damages on punch pins, like break, cracks and so on. If there is any physical damage to the punch pins in the abnormal mass production of screws and bolts, we accept the customer to return all the pins of the same batch to the factory for product quality inspection, and eliminate the possibility of unstable material performance caused by heat treatment process. After eliminating the material quality problem, we will ask the customer to provide their analysis report on the cause of the damage of the punch pins. Combining with years of production experience, we will screen one by one until the most likely cause is found out. Then we will adjust the processing technology and start the production again.
* Solution to die core damage. Die or mold, is combination of die core, die case, front nib plate and back threaded die. In the process of producing screws and bolts, tungsten steel die cores are easy to be damaged by aging.The main die core is aging normally, we will do several more die cores for customers and do direct replacement;In the case of collapse Angle of six die cores, the direct replacement may lead to deviation of the core and the core of the die shell. In order to ensure the tolerance range of concentricity, we choose not to take out the die core, remove the entire surface and add pad blocks to ensure the length of the mold.
Although cold metal gives a feeling of no vitality and vigor, but it has its own unique life performance.Sometimes weather changes, temperature changes, pressure levels, and the properties of metals change imperceptibly, and these small changes are magnified infinitely only in production.Golden hexagon is not afraid of their products being returned, can also be said to rely on these returns and maintenance experience accumulated, step by step to understand the material and products, do more professional mold manufacturers, production is suitable for different customers of the mold and die.We do not do the best do not do the worst, we only do what customers feel is the best use of the most suitable products.